The advantage of the LED lighting bulb

     LED lighting bulb is a new type of energy-saving lamps to replace the traditional incandescent bulbs. The traditional incandescent lamp high energy consumption, short service life, in the global resource constraints situation, has been gradually by governments to ban the production, instead is the product of electronic energy-saving lamp, electronic energy-saving lamp while improving the energy saving effect, but which contains a lot of heavy metals will pollute the environment, contrary to the trend of environmental protection. With the rapid development of LED technology, the LED lighting bulb has gradually become a new type of green lighting products preferred. LED bulb light is much better than traditional energy-saving lamps in the light principle, energy saving and environment protection etc..

How to maintain the LED ceiling lamp

     LED ceiling light after long hours of work, but also requires careful maintenance. The usual every detail may extend or shorten the service life. If the LED ceiling lamp are well maintained, its value will be better utilized.
     1. Do not frequently switch LED lamp. LED ceiling light current often switch to increase voltage strengthened, temperature will be higher, so that it can easily burned.
     2. LED ceiling light are often need to keep clean, too much dust will affect the power components, also affect its glow.
     3. To disconnect the power supply before cleaning led ceiling lamp, first with a small brush to clean the surface and heat dissipation parts, then use the relatively dry soft tissue or cloth to wipe clean the whole.
     4. When the LED ceiling lighting have a problem, must please repair personnel to solve, to prevent electric shock or any other accidents.
     5. When you do not use LED ceiling light, please turn it off, try not to let it work for a long time, so the LED ceiling lamp brightness and life is favorable.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) yjblog1511
The original address: http://www.sc-ledlights.com/news/led_ceiling_lamp.html, reproduced please specify.

About LED grille light life

     LED grille light using light-emitting solid light source, its life depends mainly on the solid LED light source and drive cooling. At present, the service life of LED light source has reached more than 100000 hours. With the popularization of the LED technology unceasing development and application of technology, in the drive and cooling can reach the ideal state. High quality LED grille light life on the market up to 10000-50000 hours, 10-50 times of the ordinary halogen lamp.
     LED lighting products, saving more than 80%, almost maintenance free, without frequent replacement of lamp components, about half a year down the cost savings can be exchange cost. LED grille lamp is environmental friendly, downy light, the spectrum pure, will not cause adverse effect on people's vision and body.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) yjblog1511
The original address: http://www.sc-ledlights.com/news/led_grille_light.html, reproduced please specify.

The characteristics of square LED panel light aluminum frame

    LED panel light is a high-grade indoor lighting, the square led panel light shell is made of aluminum alloy by anodic oxidation and the light source is LED. The overall design of the lamp is beautiful and simple, luxurious atmosphere, and has good lighting effect. LED panel light aluminum frame is the main channel of LED heat dissipation. It is forming by the mold stamping, the mold fee is low, the processing fee is low, too.
    The characteristics of LED panel lighting aluminum frame:
1, Simple, generous, beautiful appearance, high grade;
2, High strength, solid structure, fast heat conduction, good heat dissipation, environmental protection, no pollution;
3, Convenient assembly, all mounting rack can be shared, the power supply can be installed on the cover plate or external;
4, The production is convenient, scheme is mature, product assembly efficiency is high, scope of application is wide;
5, The surface treatment can be silver lustre, white baking finish, can be customized.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) yjblog1511
The original address: http://www.sc-ledlights.com/news/news_show_4_20_218.html, reproduced please specify.

Buy cabinets LED track lights basic requirements

     Cabinet lighting is very important, must use the most bright lighting, have a higher level of illumination, so in the selection of cabinets LED track lights, must choose at least more than 20W high power track lights.
     Enhanced lighting effects. For important commodities, precious commodities and commodity display, each point of the brightness should not the same, there should be a local or spot lighting in the illuminated objects, so to choose the light effect is good, the first COB LED track light.
     Attention should be paid to the color rendering index. Under the initial investment and the user cost is sufficient conditions, as far as possible the use of color light source products high color, this is to ensure that the store has a rich and full color.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) yjblog1511
The original address: http://www.sc-ledlights.com/news/news_show_4_22_217.html, reproduced please specify.

LED spot light bulbs specifications and type

     LED spot light bulbs the main alternative to traditional halogen lamp, so the dimensions are reference IEC 60630 standards, lamp base reference to IEC 60061-1 standard. According to the traditional spotlights, the current LED spot light is mainly has several types of MR16, PAR16, PAR20, PAR30, PAR38. The LED spot light MR16 usually adopts the GU5.3 lamp base; PAR16 mainly uses GU10, E26 (America)/E27 (Europe and China), E14 lamp base; PAR20/PA30/PAR38 mainly uses E26, E27 lamp base.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) yjblog1511
The original address: http://www.sc-ledlights.com/news/news_show_4_20_216.html, reproduced please specify.

LED tube bulbs material and appearance

     The LED tube bulbs is composed of a plurality of high brightness low power LED, PC with a high transmittance, radiating aluminum parts and power supply.
     LED light source lamp uses the straw hat head and SMD beads two types. SMD beads which is commonly used in the 3528, 5050, 1W high power etc..
     The LED light tube shell there are two types:
1, PC transparent shell, pervious to light performance is high, can see the inside of the lamp;
2, Translucent matte casing, with soft light.
     The built-in LED tube power supply, the working voltage is wide voltage range, from 85V to 265V can be used.
     LED tube bulbs can be made into red, yellow, blue, green, white, warm white and other colors.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) xnxlbolg1510
The original address: http://www.sc-ledlights.com/news/news_show_4_22_215.html, reproduced please specify.