The advantage of the LED lighting bulb

     LED lighting bulb is a new type of energy-saving lamps to replace the traditional incandescent bulbs. The traditional incandescent lamp high energy consumption, short service life, in the global resource constraints situation, has been gradually by governments to ban the production, instead is the product of electronic energy-saving lamp, electronic energy-saving lamp while improving the energy saving effect, but which contains a lot of heavy metals will pollute the environment, contrary to the trend of environmental protection. With the rapid development of LED technology, the LED lighting bulb has gradually become a new type of green lighting products preferred. LED bulb light is much better than traditional energy-saving lamps in the light principle, energy saving and environment protection etc..

How to maintain the LED ceiling lamp

     LED ceiling light after long hours of work, but also requires careful maintenance. The usual every detail may extend or shorten the service life. If the LED ceiling lamp are well maintained, its value will be better utilized.
     1. Do not frequently switch LED lamp. LED ceiling light current often switch to increase voltage strengthened, temperature will be higher, so that it can easily burned.
     2. LED ceiling light are often need to keep clean, too much dust will affect the power components, also affect its glow.
     3. To disconnect the power supply before cleaning led ceiling lamp, first with a small brush to clean the surface and heat dissipation parts, then use the relatively dry soft tissue or cloth to wipe clean the whole.
     4. When the LED ceiling lighting have a problem, must please repair personnel to solve, to prevent electric shock or any other accidents.
     5. When you do not use LED ceiling light, please turn it off, try not to let it work for a long time, so the LED ceiling lamp brightness and life is favorable.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) yjblog1511
The original address: http://www.sc-ledlights.com/news/led_ceiling_lamp.html, reproduced please specify.

About LED grille light life

     LED grille light using light-emitting solid light source, its life depends mainly on the solid LED light source and drive cooling. At present, the service life of LED light source has reached more than 100000 hours. With the popularization of the LED technology unceasing development and application of technology, in the drive and cooling can reach the ideal state. High quality LED grille light life on the market up to 10000-50000 hours, 10-50 times of the ordinary halogen lamp.
     LED lighting products, saving more than 80%, almost maintenance free, without frequent replacement of lamp components, about half a year down the cost savings can be exchange cost. LED grille lamp is environmental friendly, downy light, the spectrum pure, will not cause adverse effect on people's vision and body.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) yjblog1511
The original address: http://www.sc-ledlights.com/news/led_grille_light.html, reproduced please specify.

The characteristics of square LED panel light aluminum frame

    LED panel light is a high-grade indoor lighting, the square led panel light shell is made of aluminum alloy by anodic oxidation and the light source is LED. The overall design of the lamp is beautiful and simple, luxurious atmosphere, and has good lighting effect. LED panel light aluminum frame is the main channel of LED heat dissipation. It is forming by the mold stamping, the mold fee is low, the processing fee is low, too.
    The characteristics of LED panel lighting aluminum frame:
1, Simple, generous, beautiful appearance, high grade;
2, High strength, solid structure, fast heat conduction, good heat dissipation, environmental protection, no pollution;
3, Convenient assembly, all mounting rack can be shared, the power supply can be installed on the cover plate or external;
4, The production is convenient, scheme is mature, product assembly efficiency is high, scope of application is wide;
5, The surface treatment can be silver lustre, white baking finish, can be customized.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) yjblog1511
The original address: http://www.sc-ledlights.com/news/news_show_4_20_218.html, reproduced please specify.

Buy cabinets LED track lights basic requirements

     Cabinet lighting is very important, must use the most bright lighting, have a higher level of illumination, so in the selection of cabinets LED track lights, must choose at least more than 20W high power track lights.
     Enhanced lighting effects. For important commodities, precious commodities and commodity display, each point of the brightness should not the same, there should be a local or spot lighting in the illuminated objects, so to choose the light effect is good, the first COB LED track light.
     Attention should be paid to the color rendering index. Under the initial investment and the user cost is sufficient conditions, as far as possible the use of color light source products high color, this is to ensure that the store has a rich and full color.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) yjblog1511
The original address: http://www.sc-ledlights.com/news/news_show_4_22_217.html, reproduced please specify.

LED spot light bulbs specifications and type

     LED spot light bulbs the main alternative to traditional halogen lamp, so the dimensions are reference IEC 60630 standards, lamp base reference to IEC 60061-1 standard. According to the traditional spotlights, the current LED spot light is mainly has several types of MR16, PAR16, PAR20, PAR30, PAR38. The LED spot light MR16 usually adopts the GU5.3 lamp base; PAR16 mainly uses GU10, E26 (America)/E27 (Europe and China), E14 lamp base; PAR20/PA30/PAR38 mainly uses E26, E27 lamp base.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) yjblog1511
The original address: http://www.sc-ledlights.com/news/news_show_4_20_216.html, reproduced please specify.

LED tube bulbs material and appearance

     The LED tube bulbs is composed of a plurality of high brightness low power LED, PC with a high transmittance, radiating aluminum parts and power supply.
     LED light source lamp uses the straw hat head and SMD beads two types. SMD beads which is commonly used in the 3528, 5050, 1W high power etc..
     The LED light tube shell there are two types:
1, PC transparent shell, pervious to light performance is high, can see the inside of the lamp;
2, Translucent matte casing, with soft light.
     The built-in LED tube power supply, the working voltage is wide voltage range, from 85V to 265V can be used.
     LED tube bulbs can be made into red, yellow, blue, green, white, warm white and other colors.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) xnxlbolg1510
The original address: http://www.sc-ledlights.com/news/news_show_4_22_215.html, reproduced please specify.

The characteristics of 7W led light bulbs

     The characteristics of 7W led light bulbs can be concluded as following:
     Convenience: You can directly replace the existing E27, E14, B22, GU10 CFL and incandescent interface.
     Security: ordinary energy-saving lamp working temperature at 60 to 80 °C, incandescent temperature is more high (80 to 120 °C), if you do not accidentally hit will burns.
     Energy saving: the power of incandescent 20W ~ 100W, energy-saving lamp power 5W ~ 65W.
     Environmental protection: LED light source no infrared and ultraviolet radiation at work.
     Short response time: 7W led light bulbs will not change because of the ambient temperature change, the normal working temperature of -35~80 °C.
     Long life: the life of an ordinary incandescent lamp is 1000 hours, energy-saving lamp life is 8000 hours (according to work 4 hours a day). LED lamp life is 50,000 hours (calculated according to 24 hours a day).

The above article from Sourcechip official website (http://www.sc-ledlights.com/) xnxlbolg1510
The original address: http://www.sc-ledlights.com/news/news_show_4_20_214.html, reproduced please specify.

How to choose the mall LED down light

     Many malls engineering companies when choosing mall LED down light is not it will consider the following questions: Price? Quality? Security? Stable and lasting? For LED down light, summed up in one sentence, outsiders see brightness, insiders look at durability. What does that mean? The appearance of the same LED down light, at the beginning of a period of time the effect and brightness are similar, but after 3-6 months began to have the difference, the poor quality LED down light began to darken, the color of the light began to change, this will inevitably lead to market each local brightness is inconsistent, color confusion the phenomenon; high quality LED ceiling down light will not appear such phenomenon, will be able to maintain this effect. So high quality mall LED down light than the durability!

The above article from Sourcechip official website (http://www.sc-ledlights.com/) xnxlbolg1510
The original address: http://www.sc-ledlights.com/news/news_show_4_22_213.html, reproduced please specify.

Some problems of household LED bulb light

     In recent years, the luminous efficiency of LED is gradually improve. However, there are still some technical problems for household LED bulb light in the popularization and application:
Luminous flux needs to be further improved. Using LED as lighting source, must be able to emit more light, must have higher energy efficiency.
LED light and natural light there is still a certain gap. Incandescent lamp with a very strong yellow light component, give a person a kind of warm feeling. White LED is emitted white light with a blue light component, in this light, people's vision is not very natural.
Higher prices. This is the main reason affecting LED bulb light popularity. However, the improvement for chip technology in recent years, the manufacturing cost is decreasing sharply, nearly three years the price of LED declined by almost 50%, it is moving in the direction of the development of high efficiency and low cost, which provides favorable conditions for the application of LED bulb light in the field of lighting. In addition, a good price can also compensate for the lack of cost price.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) xnxlbolg1510
The original address: http://www.sc-ledlights.com/news/news_show_4_20_212.html, reproduced please specify.

The design requirements of LED ceiling light radiator

     The design requirements of LED ceiling light radiator has the following parts:
     To determine the thermal design power of LED ceiling light. Parameter design of radiator: metal specific heat, thermal conductivity of metal, thermal resistance, thermal resistance of chip rate, ambient air resistance etc..
     Determine the type of using heat dissipation (natural convection, forced air cooling, heat pipe cooling, and other heat radiation mode). From the cost comparison, natural convection cooling cost is the lowest, strong wind cooling is medium, heat pipe cooling cost is high, the Jet cooling cost is the highest.
     To determine the maximum operating temperature of LED ceiling light license.
     Calculate the volume, heat radiating area of the radiator, and determine the shape of the radiator.
     The radiator and the LED combined into a complete LED ceiling lighting lamp, and work more than 8 hours, check the ceiling lamp temperature at room temperature to see whether meet the cooling requirements, in order to test the calculation is correct, such as do not meet the conditions of use, is to recalculate and adjust parameters.
     Radiator and lamp shade seal to do waterproof, dustproof. Between the lampshade and the radiator to pad aging rubber pad or silicone rubber pad, with stainless steel bolts, do waterproof, dustproof seal.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) xnxlbolg1510
The original address: http://www.sc-ledlights.com/news/news_show_4_22_211.html, reproduced please specify.

The application of LED grille down light

     LED grille down light using high quality LED light source, light non ultraviolet and infrared rays, no radiation, no harmful elements such as mercury and lead; uses the high quality optical lens, strong penetrating power, light rate is high and the light distribution; uses the high quality aluminum alloy heat material, effective heat conduction and diffusion; DC drive, response soon, no stroboscopic, glare small.
     LED grille down light applies to stores, clothing stores, boutiques, dance hall, KTV rooms, hotel, guesthouse, restaurant, museum, museum, exhibition hall, etc.. The LED grille lamp is suitable for jewelry, gold and silver jewelry and fashion lighting, lighting corridor, bathroom, garage, parking use, factories, security lights, residential use of anti-theft lamp, night lamp, the indicating lamp, night lamp use in the bedroom.

The above article from Sourcechip official website (http://www.sc-ledlights.com/) xnxlbolg1510
The original address: http://www.sc-ledlights.com/news/news_show_4_20_210.html, reproduced please specify.

In this year LED panel lighting lamp competition situation

    Although this year many enterprises enter into a LED panel lamp field, but this year the focus of competition of LED panel lighting lamp will not appear in the price. Because at present the LED panel light are mainly used in engineering, is rarely used for home. In the market, LED panel light is now mainly exports, the domestic market is a two or three year history, seemingly doing business a lot, but are around the export market.
    In addition, now the professional led light panel manufacturers are very few, therefore has not formed the scale, unlike the bulb lamp, a professional manufacturer of many. And now provides OEM of the enterprise are not many, many brand enterprises didn't do LED panel light.
    This year, LED panel light competition will not be reflected in prices, especially the positive luminescence panel light, the enterprises are still trying to do the styles, such as segmentation, atmosphere, electrodeless dimming. LED bulb lamp competition reflected in prices, because of its shape can not change, function also not increased, but the LED panel lamp also has the very big development space.

The above article from Sourcechip official website (http://www.sc-ledlights.com/), reproduced please specify. yjblog1509

What are the characteristics of commercial LED track light

    Commercial LED track light features: energy conservation / save power / long life.
    It can be 360 degrees azimuth adjusting illumination direction.
    Its appearance design elegant, white / Black / silver kinds of color, suitable for exhibition design different style.
    Light color can be customized according to the requirements of different color temperature, more suitable for different grid occasions, showing the color of the product.
    LED track spot light is a cold light source, the electrical energy directly into light energy, high efficiency, light efficiency is up to 90LM/W, 5-8 times higher than the traditional lamp.
    Service life of up to 50000 hours, do not have to regular maintenance.

The above article from Sourcechip official website (http://www.sc-ledlights.com/), reproduced please specify. yjblog1509

The applicable occasions of gu10 LED spotlight

     LED spotlight is mainly used for decoration, commercial space lighting and architectural lighting, along with the LED technology development and progress, the current gu10 LED spotlight performance advantage is very outstanding on the market, the use of high purity aluminum reflector, the most accurate reflection beam, the best effect; symmetrical narrow angle, wide angle and asymmetric light distribution system projection lamp, and with scale plate, people can conveniently adjust the irradiation angle according to the scale. In addition, in order to facilitate maintenance, LED spotlight adopts behind open lamp replacement. Lighting the best decorative effect, LED spot lighting can realize gradient, jump, color flashing, random blinking, alternating gradient and chase, scanning the dynamic effect. LED spotlight and LED underwater lights, LED buried lights, LED wash wall lamp can be used independently, but also can be used interchangeably, which produce more variable results, while the LED spotlight is mainly used for the single building, historical buildings exterior lighting, landscape lighting, light outside the building through the lighting lighting, billboard lighting and other special facilities, bars, dance halls and other places of entertainment, and atmosphere lighting, market development prospect is considerable.

The above article from Sourcechip official website, the original address: http://www.sc-ledlights.com/news/news_show_4_20_206.html, reproduced please specify. yjblog1509

LED fluorescent tube can raise attention

     According to the USA "Science Daily" the latest reports, a new study from the University of Surrey in Britain completed. Research shows that the traditional incandescent bulbs replaced LED fluorescent tube, contribute to the office workers and students to improve attention, less sleepy during the day.
     The new study University of Surrey sleep research center also found, LED fluorescent lamp with improved people reading mood, improve work efficiency, relieve fatigue, soothe emotions, reduce anger, and enhanced attention effect. In addition, the LED tube users nocturnal sleep quality can be improved obviously.
     LED fluorescent tube can enhance attention, because there is a kind of special photoreceptor in the human eye. At present a lot of office lighting are not up to standard, LED light tube is undoubtedly a good choice.
     The study also shows that, LED tube lighting can help enhance children's IQ. "The child eyes feel the light, the brain will react, eyes closed is also true. This kind of light but also through the influence children's vision to affect children's IQ, EQ and character." Experts say that prolonged exposure to black and white color will adversely affect the child's personality, install a LED fluorescent tube in the children's room is a good choice.

The above article from Sourcechip official website, the original address: http://www.sc-ledlights.com/news/news_show_4_22_205.html, reproduced please specify. yjblog1509

How to buy good quality LED bulb light

     How to buy good quality LED bulb light? At present, the development of the LED lighting market space is large, the number of LED bulb lamp is also very much on the market. When you purchase LED bulb, if followed the following four methods, then the price would be more to grasp more accurately. So you can buy the ideal LED bulb.
     1, LED bulb adopts chip: At present, most of the clients are generally used Taiwan chip, cost performance is the best.
     2, LED bulb Material.
     3, LED bulb color consistency. The wave length consistency is higher, the color is purer. If the led bulb factory does not have the led spectrometer, it is difficult to produce a light color pure products.
     4, The brightness of LED bulb light: Different brightness of the LED lamp, the price is different, Normal brightness and the high light of LED bulb, the price difference is relatively large. Therefore, When buying must be clear we need what kind of brightness, so as to accurately find the products we need.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_184.html, reproduced please specify. yjblog1507

The difference between commercial and household LED downlight

     As a relatively mature indoor lighting product --- LED downlight, application is quite extensive, in commercial firm in the hotel, hotels, shopping malls, office hall and so on are all can be applied to LED downlight, then for the household that is more common and more generally. Household LED downlight and commercial LED downlight is that there are some differences in the design. For example, home LED downlight, the first to consider the several factors:
1. Avoid LED downlight appear dazzling situation
2. The color temperature should be more moderate, generally warm white color temperature should be below 3000K as well, more prominent home LED down light cozy effect.
3. The look of the appearance, the appearance of collocation of different lighting effects can highlight the overall effect is not the same.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_186.html, reproduced please specify. yjblog1507

How to use LED tube lighting

     The power supply of LED tube lighting has two kinds of built-in and external. The biggest advantage of using the built-in power LED tube is able to directly replace traditional fluorescent lamps, without the need to remove any components. For best performance, we recommend using a centralized external power LED tube. At present, the main place of using LED tube is the government agency, office, shopping malls, schools, underground parking, subway and so on. These places are often using multiple lights in a room, you should adopt a centralized external power supply. It is an isolated power supply, no high voltage at the lamp tube, only DC low voltage less than 36V, which is conform the conditions of safe use.
     The only drawback of LED tube lighting is the higher prices. But its long life, energy, pollution, etc., from the point of view of these advantages is still very cost-effective. Especially in need 24 hours of continuous lighting the place, after it was used for some time, energy-saving effect is obvious.
     In the use of LED tube lamp should pay attention to the following issues:
1, to pay attention to the rated voltage, high voltage will damage the LED.
2, the installation should cut off the power.
3, LED tube suitable for indoor lighting, the working temperature is -20~50 degrees, should not be installed in the easy to rain or moisture place.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_179.html, reproduced please specify. yjblog1506

How to improve the luminous efficiency of LED downlight

     A good LED downlight, not only the appearance of fashion and elegant, and have higher luminous efficacy. The luminous efficiency of LED downlight be related to its overall design. How to improve the transmittance of LED downlight? Under normal circumstances, the light efficacy of LED downlight is good or bad, there are mainly two factors, the first is the quality of the light source, and the other one is the lampshade material, and the transmittance of lampshade.
     1, light source
     To improve light efficiency of LED downlight, the first thing to consider is the light source of LED downlight. The quality of the light source has a very important role, even if the lampshade is very good, if the light emitting efficiency of the light source is low, then the light efficiency of LED downlight is not very high, you can do a simple analysis, some high lumen light source in general can reach 80-90lm/w, this value is very common on the market, however, the only light source. The luminous efficiency of the light source has a certain relationship with the matching power supply, At the appropriate operating current, can give full play to the light efficiency of the light source.
     2, lampshade material
     On the condition of light efficiency of the light source is guaranteed, another factor affecting the luminous efficiency of LED downlight is shade material. There are PMMA, PC, glass. The difference between them: one is the different materials, on the other hand they have their own processing methods, after some special treatment will achieve higher transmittance. After processing, the light transmittance of glass is the highest. PC cover is a kind of commonly used material now, because of its relatively low cost, now a lot of LED down light or the other LED lighting is the use of PC material. The transmittance of PC cover above 80. The comprehensive calculation, the light efficiency of natural white of LED downlight in about 75lm/w, this is quite normal, the transmittance of glass cover is better, can reach more than 85. So the LED lamp manufacturers in order to improve the luminous efficiency of LED downlight, the light source and the light transmittance of the lampshade is the key objects.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_178.html, reproduced please specify. yjblog1506

How to repair LED ceiling light

     Because the LED light has the advantages of energy saving, environmental protection, long life, it has gradually penetrated into Home Furnishing lighting. Many people decorate the new house, will buy LED ceiling light, LED downlight, take them as the main lighting home, make Home Furnishing environment more fashionable.
     But in the process of using LED ceiling light, will inevitably encounter damaged or dead lights of the situation.  At present, LED ceiling light price is more expensive than the ordinary energy-saving lamps, if the replacement of the whole lamp, is not worthwhile, if can self repair is the best. Here, describes how to repair LED ceiling light for you.
     LED ceiling light does not light, the main reason is in two aspects, one is the problem  of the light source, another problem is the power. At present, LED ceiling light light source is made of SMD LED lamp beads, first turn the power off, open the shade, measured with a multimeter, to judging whether the LED light source is bad (beads are generally in series), if it is, then look at the light source style, and then buy a the same light source and replace it. At the time of purchase, should pay attention to voltage range of the light source, the light source voltage must be the same.
     If using a multimeter to detect light source is no problem, then look at whether the problem is the power, the general LED ceiling light are methods of external power supply. If the power supply is bad, buy a power supply and replacement. If the LED ceiling light manufacturer uses the power supply is not qualified, the power is very easily go wrong.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_175.html, reproduced please specify. yjblog1506

What is the classification of LED panel light

     LED panel light is a high-grade indoor lighting, the outer frame adopts aluminum alloy of anodic oxidation, the light source is LED, the entire lighting design beautiful and simple, luxurious atmosphere, not only has good lighting effect, but also can bring the feeling of beauty are welcome to come to buy.
     Classification of LED panel light:
     According to the different classification, the classification of LED panel light on the market are as follows:
     According to shape: LED panel light can be divided into squares, rectangles, circles, foreign inner circle and so on.
     According to the specifications and dimensions: dimension of LED panel light are 300mmx300mm, 300mmx600mm, 300mmx1200mm, 600mmx600mm.
Press Installation: There are two kinds of hanging and embedded, you can also ceiling installation.
     According to the light emitting mode: there are two kinds of side-emitting LED panel lights and front-emitting LED panel light.
     At present, LED ceiling panel light mainly use occasions for classroom lighting, office lighting, commercial lighting and hotel lighting, can also be applied to the exhibition hall, the family living room, decorating the environment, the creation of technology and fashion sense.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_173.html, reproduced please specify. yjblog1506

What is the LED tube

     With the LED lighting technology to improve, LED lighting occupy a lot of space in the market. LED tube is one of them. What is the LED tube? This paper have a simply introduce LED tube for you.
     Both ends of the traditional fluorescent lamp each have a filament, there are trace of argon and mercury vapor in the tube. On the inner wall of the tube is coated with fluorescent powder. When electrified the gas between the two filament produced ultraviolet, make phosphors emit visible light. Because it contains heavy metals pollutants "mercury", fluorescent tube scrapped environmental pollution is very serious. The LED Tube uses light-emitting diodes as a light source, higher efficiency, more energy efficient, longer life, and more environmentally friendly. At present, become the most ideal products to replace the fluorescent lamp. LED tube and traditional fluorescent lamp dimensions are the same on the caliber, have LED T5 tube, LED T8 tube, T10 tube, length of 0.6m, 0.9m, 1.2m, 1.5m, 1.8m, 2.4m.
     LED tube installation is very simple. When installed, remove the old fluorescent lamp, put on the LED tube, and remove the ballast and starter, can be directly to the LED tube connected to AC power.
     LED tube energy saving up to more than 70%, life is more than 10 times the ordinary lamp (theoretically can reach more than 50000 hours), require little maintenance, does not exist often replace the lamp tube, a ballast and a starter question. Semiconductor light source, green environmental protection type soft light, pure color, protect people's eyesight and physical health.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_171.html, reproduced please specify. yjblog1506

COB led downlight the development trend in the future

     The development speed of LED downlight beyond my imagination. The initial stage of LED downlight, its light source is mainly the LED light bead. After a period of time,  the emergence of SMD and COB. Some people think that COB belongs to downlight, but I think the COB is upgrade spotlight, and can slowly replace high-power lamp bead downlight.
     COB led downlight is upgraded version of the traditional downlight and (LED down light), lamps compact, suitable for different places, use a wider scope. Generally used for auxiliary lighting and decorative lighting. Can make up defects of the traditional downlight and LED downlight, is the future trend. Now the COB products still in the transitional stage. We believe that in the next few years, COB led downlight will be a large number of occupation of the market.
     At present, there are many LED lamp manufacturers in the production of LED down light, this shows that the demand of LED downlight in gradually increasing, so LED downlight market prospects are very considerable.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_170.html, reproduced please specify. yjblog1506

Development prospect of LED ceiling fixtures

     In modern lighting, LED lamp have a distinct advantage relative to incandescent lamps, It is increasingly being everyone's attention and love. LED ceiling lamp more widely used in commercial lighting, It‘s also gradually development to Home Furnishing lighting. Here's a look at the development prospects of LED ceiling fixtures:
     LED ceiling light energy saving and environmental protection, consistent with the pattern of sustainable development, it's the main development direction of future lighting products, so by the concerns of the community.
     LED ceiling fixtures bright color, the advantage is unmatched by other products lighting. And LED Ceiling Light easy to control, by digital control technology to achieve dynamic lighting effects. And its small size, diverse styles, apart from the common square LED ceiling light and round ceiling light, you can also make more novel modelling of light fixture.
     However, LED ceiling fixtures development there is a certain resistance. The main reason is that the price of LED Ceiling expensive side. But the performance of LED Ceiling light much better than ordinary lamp. High light efficiency, reliability, can greatly save the cost of maintenance after installation.
     LED ceiling light initial cost is higher than that of the traditional light fixtures. It is suitable for the need of long time use lamps users, because LED ceiling lamp consumption total cost less than traditional lamps.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_168.html, reproduced please specify. yjblog1505

LED par light types introduced

    First, the use of the lamp according to the classification. LED par light types are commercial lighting and stage lighting. Both types of LED PAR lamps are lighting effect. Among them, commercial lighting, also known as spotlights, This type of lamp is mainly use high-power lamp beads, lamp beads color is relatively simple, and the smaller size. Generally used in shopping malls, hotels, guesthouses and other places. The stage lighting lamps, according to the needs of the stage can change the color and the power of lamp beads. And this type of lamp beads generally have red, green, blue and other colors of light, generally used for stage performances, weddings, exhibitions, conferences times.
    The second, according to the appearance of LED Par light classified. Here mainly refers to the LED par lamp shell material, generally aluminum shell, cast aluminum housing and waterproof housing three types.
    Third, according to the classification of par lamp power. LED par lamp power generally 24W, 36W, 54W, 108W, 162W types. These are about all kinds of LED Par introduced, hope you to understand led par light after reading this article.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_165.html, reproduced please specify. yjblog1505

Hole size 230mm LED down light features

    Energy: the power consumption of traditional energy saving lamp within 20W, and a power consumption of traditional energy-saving downlight is 38W-45W, LED lighting is more energy-saving than traditional light source above 60%.
Low light decay: 230mm LED down light light source using the 3020 LED of low light decline and high brightness. 10000 hours of light decline is less than 30%.
High brightness: the lens using a large-size chip, the luminous efficiency of 98 lumens per watt.
    Environmental protection: the light emitted no ultraviolet and infrared light by the LED light source, lamps do not contain mercury and other harmful substances inside, traditional light contains mercury harmful substances.
Long life: the life of the LED down light up to 20,000 hours, 8 hours per day, you can use more than 6 to 8 years. The life of the traditional light source generally does not exceed 6,000 hours.
    Protect your eyes: opening size 230mm LED down light using constant current power supply DC power supply, the light emitted no strobe by the light source, does not hurt the eyes. The traditional downlight have strobe.
Good seismic performance: LED is a solid-state light sources, seismic performance, not fragile.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_162.html, reproduced please specify. yjblog1505

The ultra-thin recessed led ceiling lights packaging materials

      The LED panel light in the transport process, the panel lights unscathed to the customer, packaging materials is very important. Let's look at ultra-thin recessed led ceiling lights packaging materials.
      The ultra-thin recessed led ceiling lights packaging generally use EPE and corrugated box, EPE is a new type of environmentally friendly packaging materials. EPE material with impermeable to moisture, shockproof, noise, thermal insulation, good plasticity, toughness, recyclable, environmental protection, anti-collision strong advantages, but also has good chemical resistant.
      Packaging using corrugated boxes, protective the internal LED panel light.
1, Adapt to all types of decoration printing cartons, can solve problem of the protection and promotion of the commodity .
2, Have a lot of good protection function for commodity.
3, Packaging convenient, easy to work and improve efficiency.
4, Lenz structure similar arched structure, can play a damping effect, has good mechanical properties. Light weight, good structural performance.
5, Transportation costs low, and easy to implement packaging and transportation of mechanization and automation.
6, Ease of recycling, in line with environmental requirements.
      LED ceiling panel light have a good packaging materials,  you do not have to worry about the product is damaged in transit.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_159.html, reproduced please specify. yjblog1504

The advantages of LED tube

    Compared with the traditional fluorescent lamp, The advantages of LED tube as follows:
    1. Environmental protection lamp, protect the earth. Traditional tube contain a lot of mercury vapor, if broken, mercury vapor will evaporate into the air. LED lamp does not use mercury, and LED products do not contain lead, to protect the environment.
    2. Efficient conversion, reduce fever. Traditional tube will produce a lot of heat, LED tube can most of the energy is converted to light energy and reduce energy waste.  (LED will produce heat, and the heat will cause the LED light failure, hence, the need to strengthen the LED tube cooling function.)
    3. Advantages of LED tube: quiet comfort, no noise. LED tube does not produce noise, the use of sophisticated electronic equipment a good choice for the occasion. Suitable for library, office places like.
    4. Soft light, eye protection. The traditional tube using the 220V alternating current, so it will have 100-120 times per second strobe. LED tube is to directly convert AC to DC, no flicker, protect the eyes.
    5. No UV, no mosquito. LED tube will not produce ultraviolet lamps and lanterns, so compared with the traditional, fewer mosquitoes around in the light source. The room will become more and more clean and tidy.
    6. Voltage range: 80V-245V. The traditional tube is released by the high voltage rectifier to light, when the voltage decreases is not lit. While the voltage within the LED tube in a certain range can be light, we can adjust the brightness.
    7. Energy saving, longer life. LED tube power consumption is the traditional tube 1/3, life is 10 times the traditional tube, can be long-term use without replacement, reduce labor costs. More difficult to change for the occasion.
    8. Advantages of LED tube: firmness, use for a long time. The use of LED lamp body is epoxy resin instead of the traditional glass, a more solid, even hit the floor LED tube is not easily damaged, can be assured use.
    9. Compared with ordinary tube, LED fluorescent lamp without ballast, without starter, no stroboscopic.
    10. Maintenance free, frequent switch does not cause any damage.
    11. Safe and stable quality, can withstand 4KV high voltage, low heat, can work at -30 ℃ ~55 ℃.
    12. Have an impact on the surrounding environment will not. No ultraviolet and infrared rays, no harmful materials, such as mercury, eye protection, no noise.
    13. Good vibration resistance performance, easy to transport.
    On the market, has the high quality LED tube, there are inferior products, therefore, it is very important to master the purchase method of LED tube.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_156.html, reproduced please specify. yjblog1504