How to maintain the LED track light

     LED track light used in shopping malls counter lighting, without proper maintenance, will affect the lighting effects, to consumers caused by a bad impression on the vision. Will soon be intense darkness without light. How to ensure that the lighting effect of LED orbit lamp? We need some maintenance on the track lights, lamp brightness can maintain, improve the counter sales. So how to maintain the LED track light?
     The first. Buy LED track light, not to busy to install, should see the product instructions carefully, and then in accordance with the instructions to install, so that we can avoid some unnecessary trouble;
     Second. Each part of regular inspection of products, to prevent potential safety hazard, causing unnecessary losses;
     Third. Cleaning and maintenance should be careful not to change the structure of LED track light, in a clean maintenance after the end, the lamp installed in accordance with the original appearance, not missing, wrong loading;
     Fourth. To strengthen the maintenance, can prolong the service life of the track lights. Often wipe with a cloth, and pay attention to prevent moisture intrusion, to avoid corrosion damage or leakage short-circuit phenomenon;
     Fifth. Do not frequently switch, because at the moment of frequent start track lights, the current is greater than the rated current, the track lamp rapid temperature rise, will greatly reduce its service life, so to minimize the lamp switch.
     Sixth. Damp easily lead to track light rust, fade, we should prevent moisture intrusion, avoid corrosion damage or leakage circuit.
     Seventh. LED track light is best not to use water to clean, wipe with a dry cloth dampened in water, if not accidentally hit the water to try to dry, do not wipe with a damp cloth after the turn on the lights.

blogyuanjing01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_140.html, reproduced please specify

The design of LED bulb lamp

    LED bulb lamp to replace the incandescent lamp, then in the lamp cap and shape are similar to the incandescent lamp. The design of LED bulb lamp requirements are as follows.
    1. Brightness to almost incandescent lamp. Incandescent lamp wattage usually only, do not pay attention to the lumen. LED bulb lamp not only has the wattage, and luminous flux. In the same light, LED bulb relative to the power of incandescent lamp can save 10 times. One thing to note, at present, from the LED bulb lamp light efficiency and heat dissipation, it also can't do more than 10 watt.
    2. Appearance should be similar. Usually the incandescent lamp to pear shaped, so LED bulb lamp should be designed into a pear shaped.
    3. The volume and weight. Because LED requires constant and radiator, LED bulb weight is greater than incandescent lamps.
    4. The lamp cap to the same. LED bulb lamp holder types must be the same as incandescent lamp.
    5. Supply voltage should be the same. The voltage of each country is different, but the LED bulb lamp generally use the switch power supply, so it can be wide supply voltage 100-240V.

blogyuanjing01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_141.html, reproduced please specify

SourceChip will attend HK International Lighting Fair in October

    SourceChip is a Chinese led light manufacturer with 15-years experiences in making and selling LED Lights. The advanced equipments and excellent management keep the company ahead of the industry.
    We grasp this opportunity to enhance brand influence and know more about the information of lighting industry in HK International Lighting Fair which is Organized by the Hong Kong Trade Development Council in HK Convention and Exhibition Center on Oct. 27-30, 2014. HK International Lighting Fair(Autumn Edition) is held annually in October in Hong Kong, China, featuring over 1,700 international exhibitors and catering to the needs of buyers from around the world.
    We will display our new-design products, including led ceiling panel light, led bulb light, led down light, led panel light and led spotlight, led track light. Our Booth No. is 5E-J32, and welcome you to visit us on Oct. 27-30,2014.

blogyuanjing01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_142.html, reproduced please specify

Introduction of LED ceiling lamp shade

     LED ceiling lamp shade commonly used is the PC board, its performance is as follows:
     Translucent: PC board transmittance up to 89%, with the glass is almost. UV coating plate in the sun exposure will produce yellowing, atomization, poor light transmission, ten years after the transmission loss is 6%, PVC turnover rate is as high as 15%~20%, glass fiber 12%~20%.
     The anti impact: PC plate impact strength is 250-300 times of ordinary glass. 30 times the same thickness of acrylic sheets. Is 2-20 times of toughened glass. Have the laudatory title of "not broken glass" and "ring of steel".
     Anti UV: PC board side is coated with anti ultraviolet (UV) coating, the other side has the anti condensation process, anti ultraviolet, set insulation anti fogging functions. UV blocking through, for protecting the valuable works of art exhibits, make it from UV damage.
     Light weight: LED ceiling light shade adopts PC board, the proportion is only half of the glass, saving transportation, unloading, installation and support frame of cost.
     Flame retardant: PC board ignition is 580 degrees Celsius. Away from the fire extinguished, does not produce toxic gases when burned, will not contribute to the spread of fire.
     The temperature adaptability: PC plate in -100 ℃ no cold crisp, not soft in 135 ℃, its mechanics in harsh environments, such as mechanical properties showed no significant changes.
     Weathering: the stability of PC plate can maintain the physical indicators at - 40 ℃ to 120 ℃ range. Artificial weathering test 4000 hours, yellowing degree is 2, transmittance reduce value is only 0.6%.

blogyuanjing01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_139.html, reproduced please specify

The status of LED down light market

     After years of development, LED down light has been widely applied in engineering, the field of decoration, replaced the traditional downlight. In the field of LED lighting, lamp can be said that the popularity of the highest category, because of its technical content is not high, no admittance threshold, who can produce, resulting in uneven quality, so the current the status of LED down light market is still relatively confused. At the same time, the current price of LED down light is very transparent, from the chip, shell, packaging and other accessories cost, the dealer basic understanding be crystal clear, but due to the low barriers to entry, producers are numerous, competition is intense, therefore LED down light profits compared to other lighting products much lower.
     Downlight generally used in shopping malls, office, factory, hospital and other indoor lighting, installation is simple and convenient for people to love. LED down light inherits all the advantages of traditional downlight. Small heat, electricity saving and long service life, maintenance cost minimization. Early LED downlight with LED beads expensive, the overall cost is high is not acceptable by the customers. With the reduction of LED downlight chip prices and cooling technology improved, laying a solid foundation for the LED down light into the business world.

blogyuanjing01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_137.html, reproduced please specify

The purchase method of LED tube

    Here, we introduce the purchase method of LED tube for you.
    Choose the appropriate color temperature. If the LED tube installation position is higher, can choose the color a little higher, such as: 6500K--7000K. So, LED light effect is relatively high. If, with the lower position, should choose color temperature low, such as the color temperature in the 5500K--6000K. The light is soft.
    Purchase LED tube also need to consider the appropriate power. Energy consumption of LED tube the same, the luminous flux vary greatly, selection of high quality, large luminous flux LED tube to replace the traditional fluorescent lamp, can be properly install less. Not with the traditional fluorescent lamp 1:1 substitution. In this way, more energy saving.
    Choose the appropriate appearance: General LED fluorescent lamp in the user idea still stays in the stage of the traditional fluorescent lamp. So, no matter what the situation, require light and the traditional fluorescent lamp the same. Manufacturers in the LED tube plus soft light plate, the light looks like with the traditional. In fact, soft board when there is a loss of light energy. Generally between 15-30%. If the installation position is higher, eyes not easy often irradiation, can consider to use a transparent cover, so, can choose to power small LED fluorescent lamp, will be more energy efficient.

blogyuanjing01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_136.html, reproduced please specify

The advantage of LED grille down light

       Compared with traditional grille down light, the advantage of LED grille down light are the following:
       More power saving: the same light efficiency power consumption is the traditional bean pot lamp 1/8 ~ 1/10 (LED electro-optic conversion rate of more than 80%, halogen lamp, metal halide lamp belongs to the incandescent lamp variants, electro-optical conversion rate of about 20%, the rest are consumed in the fever).
       Longer life: LED beans gall lights in normal Shop Lighting temperature service life is 30000 ~ 50000 hours, halogen lamp due to heat large, life is short, is also very easy to burn out, replace the shop the maintenance cost of the lamp can be straight down 5 to 10 times. Particularly the use of halogen cup bean pot lamp, light efficiency and low, the light fades and large, life, short, has become obsolete, and slowly withdraw from the market.
       Cold light source, no radiation: LED grille down light source is a cold light source, no heat radiation and ultraviolet radiation, will not cause damage to the product. Halogen, metal halide light-emitting thermal radiation, contain large amounts of ultraviolet radiation, prolonged exposure to easy to make textiles, jewelery and other surface fade discoloration.

blogyuanjing01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_135.html, reproduced please specify