Development prospect of LED ceiling fixtures

     In modern lighting, LED lamp have a distinct advantage relative to incandescent lamps, It is increasingly being everyone's attention and love. LED ceiling lamp more widely used in commercial lighting, It‘s also gradually development to Home Furnishing lighting. Here's a look at the development prospects of LED ceiling fixtures:
     LED ceiling light energy saving and environmental protection, consistent with the pattern of sustainable development, it's the main development direction of future lighting products, so by the concerns of the community.
     LED ceiling fixtures bright color, the advantage is unmatched by other products lighting. And LED Ceiling Light easy to control, by digital control technology to achieve dynamic lighting effects. And its small size, diverse styles, apart from the common square LED ceiling light and round ceiling light, you can also make more novel modelling of light fixture.
     However, LED ceiling fixtures development there is a certain resistance. The main reason is that the price of LED Ceiling expensive side. But the performance of LED Ceiling light much better than ordinary lamp. High light efficiency, reliability, can greatly save the cost of maintenance after installation.
     LED ceiling light initial cost is higher than that of the traditional light fixtures. It is suitable for the need of long time use lamps users, because LED ceiling lamp consumption total cost less than traditional lamps.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_168.html, reproduced please specify. yjblog1505

LED par light types introduced

    First, the use of the lamp according to the classification. LED par light types are commercial lighting and stage lighting. Both types of LED PAR lamps are lighting effect. Among them, commercial lighting, also known as spotlights, This type of lamp is mainly use high-power lamp beads, lamp beads color is relatively simple, and the smaller size. Generally used in shopping malls, hotels, guesthouses and other places. The stage lighting lamps, according to the needs of the stage can change the color and the power of lamp beads. And this type of lamp beads generally have red, green, blue and other colors of light, generally used for stage performances, weddings, exhibitions, conferences times.
    The second, according to the appearance of LED Par light classified. Here mainly refers to the LED par lamp shell material, generally aluminum shell, cast aluminum housing and waterproof housing three types.
    Third, according to the classification of par lamp power. LED par lamp power generally 24W, 36W, 54W, 108W, 162W types. These are about all kinds of LED Par introduced, hope you to understand led par light after reading this article.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_165.html, reproduced please specify. yjblog1505

Hole size 230mm LED down light features

    Energy: the power consumption of traditional energy saving lamp within 20W, and a power consumption of traditional energy-saving downlight is 38W-45W, LED lighting is more energy-saving than traditional light source above 60%.
Low light decay: 230mm LED down light light source using the 3020 LED of low light decline and high brightness. 10000 hours of light decline is less than 30%.
High brightness: the lens using a large-size chip, the luminous efficiency of 98 lumens per watt.
    Environmental protection: the light emitted no ultraviolet and infrared light by the LED light source, lamps do not contain mercury and other harmful substances inside, traditional light contains mercury harmful substances.
Long life: the life of the LED down light up to 20,000 hours, 8 hours per day, you can use more than 6 to 8 years. The life of the traditional light source generally does not exceed 6,000 hours.
    Protect your eyes: opening size 230mm LED down light using constant current power supply DC power supply, the light emitted no strobe by the light source, does not hurt the eyes. The traditional downlight have strobe.
Good seismic performance: LED is a solid-state light sources, seismic performance, not fragile.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_162.html, reproduced please specify. yjblog1505

The ultra-thin recessed led ceiling lights packaging materials

      The LED panel light in the transport process, the panel lights unscathed to the customer, packaging materials is very important. Let's look at ultra-thin recessed led ceiling lights packaging materials.
      The ultra-thin recessed led ceiling lights packaging generally use EPE and corrugated box, EPE is a new type of environmentally friendly packaging materials. EPE material with impermeable to moisture, shockproof, noise, thermal insulation, good plasticity, toughness, recyclable, environmental protection, anti-collision strong advantages, but also has good chemical resistant.
      Packaging using corrugated boxes, protective the internal LED panel light.
1, Adapt to all types of decoration printing cartons, can solve problem of the protection and promotion of the commodity .
2, Have a lot of good protection function for commodity.
3, Packaging convenient, easy to work and improve efficiency.
4, Lenz structure similar arched structure, can play a damping effect, has good mechanical properties. Light weight, good structural performance.
5, Transportation costs low, and easy to implement packaging and transportation of mechanization and automation.
6, Ease of recycling, in line with environmental requirements.
      LED ceiling panel light have a good packaging materials,  you do not have to worry about the product is damaged in transit.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_159.html, reproduced please specify. yjblog1504

The advantages of LED tube

    Compared with the traditional fluorescent lamp, The advantages of LED tube as follows:
    1. Environmental protection lamp, protect the earth. Traditional tube contain a lot of mercury vapor, if broken, mercury vapor will evaporate into the air. LED lamp does not use mercury, and LED products do not contain lead, to protect the environment.
    2. Efficient conversion, reduce fever. Traditional tube will produce a lot of heat, LED tube can most of the energy is converted to light energy and reduce energy waste.  (LED will produce heat, and the heat will cause the LED light failure, hence, the need to strengthen the LED tube cooling function.)
    3. Advantages of LED tube: quiet comfort, no noise. LED tube does not produce noise, the use of sophisticated electronic equipment a good choice for the occasion. Suitable for library, office places like.
    4. Soft light, eye protection. The traditional tube using the 220V alternating current, so it will have 100-120 times per second strobe. LED tube is to directly convert AC to DC, no flicker, protect the eyes.
    5. No UV, no mosquito. LED tube will not produce ultraviolet lamps and lanterns, so compared with the traditional, fewer mosquitoes around in the light source. The room will become more and more clean and tidy.
    6. Voltage range: 80V-245V. The traditional tube is released by the high voltage rectifier to light, when the voltage decreases is not lit. While the voltage within the LED tube in a certain range can be light, we can adjust the brightness.
    7. Energy saving, longer life. LED tube power consumption is the traditional tube 1/3, life is 10 times the traditional tube, can be long-term use without replacement, reduce labor costs. More difficult to change for the occasion.
    8. Advantages of LED tube: firmness, use for a long time. The use of LED lamp body is epoxy resin instead of the traditional glass, a more solid, even hit the floor LED tube is not easily damaged, can be assured use.
    9. Compared with ordinary tube, LED fluorescent lamp without ballast, without starter, no stroboscopic.
    10. Maintenance free, frequent switch does not cause any damage.
    11. Safe and stable quality, can withstand 4KV high voltage, low heat, can work at -30 ℃ ~55 ℃.
    12. Have an impact on the surrounding environment will not. No ultraviolet and infrared rays, no harmful materials, such as mercury, eye protection, no noise.
    13. Good vibration resistance performance, easy to transport.
    On the market, has the high quality LED tube, there are inferior products, therefore, it is very important to master the purchase method of LED tube.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_156.html, reproduced please specify. yjblog1504

The brief introduction of the color changing led light bulb

   The color changing led light bulb is a new LED bulbs. Its shape and the same common incandescent bulbs, but is lit, it will automatically change color at a certain time. Circulation issued blue, yellow, green, purple, blue, red, white light. It is suitable for family birthday parties, holiday parties, New Year holidays, adding to the festive atmosphere of joy, can also be used for entertainment and for advertising lights. The color changing led light bulb is characterized, energy saving, long service life, easy to use, cheap price.
   Why does the LED bulb will automatically change color? The optical principle of change color: The color changing led light bulb is composed of red (R), green (G), blue (B) composed of three primary color LED. Two-color LED that we are very familiar with. General by the red LED and green LED composition. It can separate glow red or green.  If the red LED and green LED lit simultaneously. Red and green lights are mixed into a orange. The three primary colors LED were lit the two, it can emit yellow, purple, cyan light(such as red and blue LED lit simultaneously, emitted violet light); If the red, green, and blue LED lit simultaneously, it will to produce white light. If two of the three primary color LED is lit, the lit alone, or three LED lit simultaneously, can emit seven different colors of light.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_152.html, reproduced please specify
yuanjingblog01

Installation Considerations of LED concealed ceiling light

     Installation Considerations of LED concealed ceiling light can be divided into the following points:
     The use of high voltage power supply LED concealed ceiling light, not to work in the frequent start states;
     LED ceiling light should be avoided to install the heat source and heat steam, corrosive gas places, so as not to affect the life;
     Confirm lamp operating voltage, make sure before power lamp operating voltage is correct, incorrect connection of voltage lamps may cause permanent damage;
     Before installing of the LED concealed ceiling light must first check the circuit, so as to avoid the phenomenon of leakage of electricity, resulting in personal safety. With respect to the circuit problem, the best professional electrician to install;
     Recessed led ceiling lights belongs to the electric appliance products, please have the experience and the relevant certificates of professional electricians install, in order to avoid unnecessary accidents. LED ceiling light were detected in fixed before installation, if LED ceiling light has a problem, can be replaced in time;
     Well in advance of the required mounting hole size, the power cord connected to the lamp terminal block, positive and negative attention. Confirm the installation is correct, the spring card to put up,  the lamp body is inserted into the installation hole, forced upward, LED concealed ceiling light can automatically embedded. The power supply is switched on, the lamp can work normally;
     Before installation, turn off the power, turn off the switch, while also prevent electric shock, please check the installation hole size meets the requirements while checking terminals and power input cable is securely connected, if loose, please lock before operating, otherwise may cause the lamp can not properly lit; check whether the lamps and the mounting surface smooth fit, if  there is a gap please make appropriate adjustments.

The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_151.html, reproduced please specify
yuanjingblog01