2014年10月29日星期三

Component parts and characteristics of LED shallow down lights

    The main composition of LED shallow down light (lamp body, lamp panel, a diffusion plate, light guide plate, fixing clamps, screws, supporting the aluminum substrate, driving)
    The finished product is made of aluminum alloy (ADC12) die-casting. The good thermal conductivity. Diffusion cover material for the PMMA, light uniformity, consistency.
    Product features: design excellent heat dissipation thin gear shaped, aluminum die-casting mold shell, the surface electrostatic spray treatment, the effective use of the lamp body contour and surface special craft processing mode, effectively increase the heat dissipation area, improve the heat transfer rate of the shell surface, LED surface temperature is lower, more stable performance, long service life.
    Advantages of LED shallow down lights:
    Energy: energy consumption of white LED down light is only 1/10 of the incandescent lamp, energy saving lamp 1/4.
    Longevity: LED theory of life can be more than 100000 hours, for ordinary household lighting is put things right once and for all.
    Firm: solid state encapsulation, belongs to cold light source type, convenient transportation and installation, can be installed in any micro and closed equipment, vibration resistance, adaptable.
    Environmental protection: no mercury (Hg) and other harmful substances to the environment, will not cause damage to the environment, LED contains no infrared, ultraviolet.
    Quick response: LED fast response speed, the total elimination of the traditional high pressure sodium lamp starting process is long. Application: hotels, shopping malls, schools, hospitals, office, room, family and other indoor lighting places.
    Economy: save electricity, reduce electricity costs, a year and a half can cost recovery lamp.
    Low Carbon: the power saving is equivalent to reducing carbon emissions.
15W led down light

blogyuanjing01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_150.html, reproduced please specify

2014年10月28日星期二

Why LED pop ceiling light so popular

    Since this year, Home Furnishing lighting has become the main target of the LED lamp, many LED lamp manufacturers have introduced LED ceiling lamp, LED bulb lamp, LED downlights and other home lighting products, LED ceiling lamp is more sales hot, many LED Luminaire distributors and agents are reflected, LED ceiling lamp into the leading products, sell well, can sell a lot of LED ceiling light every day.
    Why LED pop ceiling light can be popular in the market? In fact, this is to be expected, this can be from the technical, quality, cost and price perspective.
    Many retail businesses need LED ceiling lamps, now basically have LED ceiling in  lighting store. Consumers to buy lamps, the first sentence is to ask "Is there LED lights," and some words will go in and see, there is no U-turn left. LED ceiling lights can quickly seize store displays to attract consumers, and let the consumer brand awareness, therefore becomes a tool of LED light panel manufacturers to develop new markets.
    LED pop ceiling light either as the main living room lamps, lighting fixtures can also be used as bedrooms, corridors, toilets and other places, and therefore it is the preferred lighting of consumers, the consumers are usually selected first LED ceiling, then select LED down light, etc. as auxiliary lighting, So the demand for LED ceiling is very high.
    LED ceiling lamp prices tend to civilians. Due to improvement in technology, chip, lamp beads, drivers and other prices have declined, LED Ceiling costs also followed the decline, and the quality has improved. At present, LED pop ceiling light light sources are mostly SMD light source light uniformity, prices are getting concessions, LED ceiling light with the traditional ceiling lamp little difference in the price, but more energy saving, so consumers are more willing to accept the LED Ceiling lamp.
    In summary, LED ceiling lamps become the market mainstream products, is not surprising. However, LED ceiling lights can be hot in the end how long, we'll see after most of the dealers are on LED ceiling lamps, customers will begin to saturate the market began to stabilize, LED lamp manufacturers and then to the LED ceiling then need to consider carefully.
LED pop ceiling light

blogyuanjing01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_149.html, reproduced please specify

2014年10月26日星期日

Remote control rechargeable led bulb light features

    Remote control rechargeable led bulb light can remotely non-directional remote control.
    Radio remote control signal is not blocked by the wall, infrared remote control has a range of restrictions and the signal can be wall obstacles.
Adjustable brightness, according to their own needs to adjust to the best effect, adjustable from 0% to 100%.
    Remote control rechargeable led bulb light receiving end software the code function, simply press any key on the remote control for about 10 seconds to success of the code, the function can also according to customer requirements change.
    Each remote control is the only code written at the factory, there will be no mutual interference.
    Flexible and convenient, the remote control can control multiple LED bulb through the code, you simply need a single remote control to remote control all the lights at home.
    The receiver with high sensitivity and strong anti-interference imported chips, dimming technology using the pulse width modulation mode, there is no stroboscopic phenomenon.
    Low-carbon energy, light and soft no flicker, no radiation, no pollution, low light failure.

blogyuanjing01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_148.html, reproduced please specify

2014年10月24日星期五

Introduction of LED tube type

    The LED tube type include: T4, T5, T8, T9, T10, said tube thickness. Numerical of T behind, said tube perimeter, such as the perimeter of T4 is 4 cm, the perimeter of T5 is 5 cm. To calculate the diameter: diameter of T8 is 1 inches (2.54 cm), T4's diameter is 0.5 inches (1.27 cm).
    T represents the diameter of the tube: 1T =1/8 [1 inch=25.4mm]; 1T=1 inch *1/8 =3.175 mm; T4=12.7mm; T5=16mm; T8=25.4mm; T9=28.6mm; T10=31.8mm (The lamp cap of LED tube is mainly used G5, G13). LED tube with the traditional fluorescent lamps are the same in size of aperture diameter. Length: 60cm, 120cm, 150cm, 180cm, 240cm;  power there: 9W, 10W, 12W, 16W, 18W, 20W, 22W, 27W, 30W , 32W etc..
    Common of LED tube type: φ26MM*600MM (60cm LED tube); φ26MM*900MM (90cm LED tube); φ26MM*1200MM (120cm LED tube); φ26MM*1500MM (150cm LED tube).

LED tube type

blogyuanjing01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_147.html, reproduced please specify

The advantages of LED down light 12w

    The advantages of LED down light 12w:
    High efficiency and energy saving. Under the condition of the same brightness, LED energy-saving lamps 1000 hours consumption 1 kwh, ordinary incandescent lamp 17 hour consumption of 1 kwh, ordinary energy-saving lamps one hundred hours 1 kwh of electricity consumption.
    Long life. Theoretically LED energy saving lamp life of up to a million hours. Ordinary incandescent lamp life of over 1000 hours.
    LED down light 12w non ultraviolet and infrared rays, no radiation, no pollution. The ordinary energy-saving lamps and incandescent light contains ultraviolet and infrared.
    Environmental protection. LED down light is not harmful elements such as mercury and lead, conducive to recycling, but does not produce electromagnetic interference.
    Protect eyesight. DC power drive, no flash, general lights are AC drive, will inevitably produce strobe, detrimental to the eyes.
    LED down light 12w with high efficiency, low fever, 90% of the electrical energy into visible light, incandescent lamp only 20% electric energy into visible light, the other 80% of the electrical energy into heat energy, is a great waste of limited resources.
    The safety coefficient is high, the required voltage and current is smaller, less heat, no safety hidden trouble, can be used in mines and other dangerous places.
LED down light 12w

blogyuanjing01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_146.html, reproduced please specify

2014年10月23日星期四

Note the use of surface mounted LED panel light

        LED panel light are now widely used in field of indoor lighting, its energy saving, environmental protection, low power consumption, long service life obtained people's support. And LED panel lights will replace the traditional lighting lamps and lanterns, the next few years will popularize. We need to pay attention to what matters in the use of LED panel lights, we together to analyze issues about using surface mounted LED panel light to note.
        First of all, surface mounted LED panel light can only be used indoors, so we can't use it in an outdoor installation. If the outdoor use, will produce the serious security hidden danger, it is difficult to reflect the advantages of LED panel light. We use the LED panel lights before the first to confirm whether the products were damaged during transport, if damaged can not be installed. If you install a damaged LED panel light, even higher than the harm in outdoor use. So we before installation must ensure that products are intact. If the product is in use, the damaged please don't try to repair, only by the professional engineer to repair.
        LED lamp‘s material to be away from children, for example, the product of small parts, easy to cause the child swallowed, also don't let the children contact live electrical equipment. Do not stare long LED light-emitting surface, do not look directly at the LED light source, long look into the eyes of high-brightness light source, the eyes have a very great harm. To stay away from open flames or hot objects. Over the period of use, the need to re-repair inspection, or scrap.
        Before cleaning the LED lamp, please be sure to turn off the power. Please clean with a dry cloth. Don't use any chemicals or corrosive things to clean.
        These note the use of surface mounted LED panel light , we know that if you are not careful, it will have very bad consequences, we must choose a good LED light panel manufacturers, we use LED panel light, we must be very careful to avoid improper use.

blogyuanjing01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_145.html, reproduced please specify

2014年10月20日星期一

The characteristics of LED grille down light

     The characteristics of LED grille down light of high quality, generally have the following points:
     1. Using special technology package, sturdy and durable, life of up to 50000 hours.
     2. No ultraviolet and infrared light, no radiation, no harmful elements such as mercury and lead, easy to recovery and utilization.
     3. Using high quality optical lens, strong penetrating power, high transmittance, uniform light distribution.
     4. Using high quality aluminum alloy heat radiating material, heat dissipation coefficient is higher, the thermal design unique, effective heat conduction and diffusion.
     5. DC drive, fast response, no stroboscopic, glare, light instantly reach the total luminous flux output.
     6. Low fever, 90% of the electrical energy into visible light.
     7. The required voltage, current is smaller, less heat, no safety hidden danger.
     8. The advantage of LED grille down light: using constant current and constant voltage control, the use of wide voltage, overcome the grid and noise pollution generated by the ballast.
     9. Earthquake resistance, impact resistance, with CE, ROHS, FCC and other international certification standards.
     10. The characteristics of LED grille down light: double steering even 360 degrees and pull up and down.

LED grille down light

blogyuanjing01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_144.html, reproduced please specify