cob 30w led down light installation notes

         LED Downlight is an embedded inside the ceiling lighting, its most important feature is the ability to maintain the overall unity and perfect architectural, structural advantages of the use of hidden architectural interior light, LED light source is not exposed, does not irritate skin, eyes !
         Note the following when installing cob 30w led down light:
1, before installation, cut off the power, turn off the switch, in addition to prevent electric shock, please check the size of the installation hole whether it meets the requirements at the same time, check the wiring terminal and a power input line is connected firmly before installation, such as loose please lock after operation, otherwise it may lead to abnormal light lamp; lamp examination and installation of surface smoothness. If there are gaps, please make the appropriate adjustments.
2, storage requirements: LED down light for carton packaging, by severe mechanical impact and the sun and rain are not allowed in the transportation process, do not touch the bulb surface. Try not to be installed in the heat and corrosive gas!
3, According to the size of the installation hole mall after processing requirements, power line connected to the terminals of lamps, note the positive and negative pole. After wiring inspection installation is correct, the spring card stand up, and the light body into the mounting hole, forced upward, LED downlights can automatically go. Switch on the power, the lamp can work normally.
4, the installation site selection in no vibration, no swing, no fire hazards empty place, avoid high-altitude drops, hard object collisions, percussion. Long-term is not used in a dry and ventilated place!

bkxnxiaolong90
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_62.html, reproduced please specify