1. Buy LED track light, not to busy to install, should see the product instructions carefully, and then in accordance with the instructions to install, so that we can avoid some unnecessary trouble;
2. The various parameters and components of regular inspection of products, to prevent potential safety hazard, causing unnecessary losses;
3. Cleaning and maintenance should be careful not to change the structure of LED orbit lamp products, do not replace parts. In the cleaning and maintenance after the end, as is the lamp installed, not missing and wrong parts;
4. To strengthen the maintenance, can prolong the service life of the track lights. Often wipe with a cloth, and pay attention to prevent moisture intrusion, in order to avoid a long time corrosion damage or leakage short-circuit phenomenon;
5. Do not frequently switch, because the track lights in frequent starting moment, current usually open are greater than the normal work of the track, the lamp temperature rise rapidly accelerated sublimation, which will greatly reduce its service life, so to minimize the lamp switch.
6. Damp easily lead to track light rust, fade, we should prevent moisture intrusion, avoid corrosion damage or leakage circuit.
7. LED track light is best not to use water to clean, as long as with dry dishcloth Zhanshui wipe, if not be run into the water to try to wipe, don't turn on the lights immediately after wipe with a damp cloth.
bkxinlonglong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_20_74.html, reproduced please specify
没有评论:
发表评论