1. Please read the product specification carefully first, to confirm whether the environment to meet the specification of the conditions, and then use.
2. Remove bulb lamp, check the appearance is damaged or defective.
3. Read the instructions for use, check whether the power supply to meet the requirements, check whether the holder type matching; for example e27 led light bulb should be and E27 interface lamp holder matching.
4. Turn off the power, holding the ball bubble lamp plug into the socket part of the entrance, clockwise rotate gently, until the fastening; pay attention to the rotation can not excessive force, and the metal part of the hand can not touch the lamp cap and the lamp holder, to prevent electric shock.
5. Connect the power supply, observe whether the lamp can work normally.
6. The use of high voltage power supply bulbs, not suitable for frequent on-off, this will affect its life.
7. If the product package damage, fittings is not complete, any problems or in use process, please contact the supplier, replacement or return to factory repair; must not attempt to service the product.
bokexinlong01
The above article from Sourcechip official website (http://www.sc-ledlights.com/)
The original address: http://www.sc-ledlights.com/news_show_4_22_120.html, reproduced please specify
没有评论:
发表评论